 |
Innovations in Electronics |
|
|
Innovations in Electronics |
 |
|
The Dream Player is the best way to add realistic sounds to your layout or other audio application. But what happens when you want to control multiple sets of speakers with a single Dream Player? With the Control Outputs, the Dream Player is easily capable of controlling relays or other loads. These can be setup to control relays to select separate speaker systems as each of the Dream Player audio tracks is playing.
Meet the Dream Switcher
Click on the image above to enlarge |
Using the Control Outputs of the Dream Player, you can use relays to select the speakers as shown here. The Dream Switcher is a simple circuit board with 4 relays, audio connectors, and a terminal strip. Not that much to it really. If you want to build your own, here is the Schematic. The Dream Switcher can be used with a CD player, or any other audio source signal. It can also be used for low-level power switching! For more applications information, check this out. Some of our more creative customers have devised clever diode arrangements that combine more than one Dream Player Control Output to switch multiple relays at once. If you are another one of these clever people, consider writing a Bob's Bench article for us to share with the world. |
Available from These Fine Dealers
Or use the "Add to Cart" button to purchase directly from us.
The Dream Switcher (DP-SWA) Requires an audio patch cord to connect to the Dream Player. You supply audio source, Dream Player, or CD Player. |
Price $29.00 |
|
Audio Patch Cable (CA-AUDIO-6) 6 foot long 3.5mm Audio Patch Cable Used to connect stereo audio devices |
Price $5.00 |
|
Questions? Contact us at: info@pricom.com
