Innovations in Electronics

 

Dream Player LITE Downloads

Register for Automatic Update Notifications by Clicking HERE:

Dream Player LITE User Manual

Complete PDF of the Dream Player LITE User Manual

Download

Dream Player LITE CONFIG File for v2.0

To customize the playing characteristic of your Dream Player LITE you need to have a copy of the PRICOM CONFIG file on your SD card.

When loading the CONFIG file onto your SD card, make sure to name the file with "config" at the beginning and ".TXT" at the end. You can add your own title between the two for example: configmyfile.txt

Download

Dream Player LITE Firmware V2.0 Image File

This is Version 2.0 of the Dream Player LITE FLASH Image File.

Added new features in the Config File called "StealthMode" and "BatteryMode" which turn off the LED's and save battery life.

Added new feature in the Config File called "StartupDelay" to ignore triggers for a set amount of time. This is especially useful for motion sensors when they are warming up.

RamdomMode is now a "Shuffle" to ensure no tracks repeat. RandomMode will now shuffle ALL the files within your triggers "1-xx" "2-xx" etc.

(CLICK HERE to see all release notes)

Download

Dream Player CONFIG File for v1.8

To customize the playing characteristic of your Dream Players you need to have a copy of the PRICOM CONFIG file on your SD card.

When loading the CONFIG file onto your SD card, make sure to name the file with "config" at the beginning and ".TXT" at the end. You can add your own title between the two for example: configmyfile.txt

Download

Dream Player LITE Firmware V1.8 Image File

This is Version 1.8 of the Dream Player LITE FLASH Image File.

Added new feature in the Config File called "PlayWhileTrigger". This makes a track ONLY PLAY while the input trigger is active. This can be combined with LoopWhileTrigger so that a file will loop as long as the trigger is active, but stop right after the trigger is released. If the FadeTime is set, or if NoFade is set, the PlayWhileTrigger will obey these settings as well.

Download

Dream Player LITE Firmware V1.7 Image File

This is Version 1.7 of the Dream Player LITE FLASH Image File.

Fixed issue with BackgroundMode with NoRetrigger on the MK2. The MK2 would play the Background Track, but could not be triggered at all from there. With corrected version, NoRetrigger can be used with BackgroundMode so that a trigger can happen while playing the Background Track, but no triggers will be seen while playing a triggered track during playback.

Added separate HighTrigger settings for each of the 4 trigger inputs on the MK2. This way, each trigger input can be normally-open or closed. The Config File settings are "HighTrigger1" "HighTrigger2" "HighTrigger3" and "HighTrigger4"

Download

Dream Player LITE Firmware V1.6 Image File

This is Version 1.6 of the Dream Player LITE FLASH Image File.

Added BackgroundMode for the MK2. The MK2 will play a file starting with "0-xxx.wav" at power up, and continue to loop this file until a trigger happens. When a trigger happens, the "0-backgournd.wav" file will fade out using the FadeTime parameter from the config file (NoFade also works) After the trigger file has played, the background file will fade back in using the same FadeTime value (or NoFade) Background Track playback will resume from where the file playback left off.

Download

Dream Player LITE Firmware V1.5 Image File

This is Version 1.5 of the Dream Player LITE FLASH Image File.

Fixes "MultiRandomMode" so that it can play without all 4 files being present. For example: Now you can have only sound files listed for track 1 and track 2 and the player will not freeze because there is not a file for all four tracks.

Increased file name storgage size to handle slightly longer file names. Will now accept up to 45 charecters.

Download

Dream Player LITE Firmware V1.4 Image File

This is Version 1.4 of the Dream Player LITE FLASH Image File.

Changes the playback of "MultiRandomMode" to more of a "shuffle" mode to prevent multiple playings of the same file back to back.

Allows the Dream Player to understand file headers longer then 512 bytes.

Updated Multi Random Mode provides the ability to have up to 8 track 1's, 2's, etc... allowing you to randomly play from up to 32 different tracks.

With the introduction of "MultiRandomMode" all files MUST now start with "1-" (dash) or "1" (space) you cannot use "1file.wav" as the Dream Player will not recognize the name.

Download

Dream Player LITE Firmware V1.3 Image File

This is Version 1.3 of the Dream Player MK2 FLASH Image File. Use this file to upload to your Dream Player FLASH.

Fixes some of the little problems from the previous version.

Download

 

About Us   |   Join our eMail List   |   Contact Us   |   Entire Site Contents © 2018 PRICOM Design